FEATURES

• No reduction of heater voltage is required at any value of mean input power. For optimum performance a value within the specified ratings must be maintained.
• Measured with heater voltage of 6.3 V and no anode input power, the heater current limits are 0.5 A minimum,0.6 A maximum.
• Design test only. The maximum frequency change with anode temperature change (after warming) is -0.25MHz/°C.
• Tolerance ± 10%
• Measurements taken ‘as read’ using suitably calibrated equipment.

Specifications

• Operating frequency :9410 ± 30 MHz
• Cathode:indirectly heated
• Heater voltage (see note 1):6.3 V
• Heater voltage (for operation) :6.3V
• Output power (mean): 4.0 W

Series

Brochures/Product Link

MG4004

MG4006